Console module »DVI-CON-2-Fiber«
Computer and console modules · 155
Console module »DVI-CON-2-Fiber«
With DVI-CON-2-Fiber console modules, you can connect a console (DVI monitor, key-
board, mouse and audio devices) to two digital matrix switches of the ControlCenter-
Compact or ControlCenter-Digital series.
At the installed console, matrix switch users can access a computer module to operate
the connected computer.
The buttons on the front panel of the console module or configured key combinations
(select keys) let users switch between the connected matrix switches.
Package contents
1 × DVI-CON-2-Fiber console module
1 × Power cable
1 × »Manual information« flyer
1 × »Safety instructions« flyer
Required accessories
2 × Compatible optical fibre cable to connect the console module to two matrix
switches or compatible computer modules
NOTE:
This console module can be connected to a compatible fiber port of
ControlCenter-Compact matrix switches or ControlCenter-Digital matrix switches
(requires CCD-I/O 16-Card-Fiber).
IMPORTANT:
Both, the console module and the fiber ports are available as single-
mode variants or as multimode variants. Make sure that the port at the console module,
the fiber port and the optical fibers are compatible with each other.
ADVICE:
Instead of a matrix switch, you can also connect a compatible computer
module to each of the two channels.
To Next Page
Loading...
Need help?
General
