To Next Page

To Previous Page

12. After the installation, click "Print &Test Page" button. If your printer prints the test page

successfully, it means that you have installed the driver correctly.

3.1.2.3. Installation by wireless network connection mode(applicable to Wi-Fi

models)

Wireless network connection type is divided into basic structure mode and Wi-Fi Direct mode

(please refer to Chapter 5 for details).

3.1.2.3.1. Installation in basic structure mode

1. Connect computer to access point (wireless router).

2. Connect the printer to computer via USB cable, then power the printer on.

3. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run

the installation procedure.

• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the pop-up window, then click "Autorun.exe" to run the

installation procedure.

• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the window, then click "Autorun.exe" to run the installation

procedure.

Note:

• Some computers may be unable to auto play the CD beacase of system configuration.

Please double click "Computer" icon, find "DVD RW driver", then double click "DVD RW

driver" to run the installation procedure.

4. Click on the "I agree" button on the right buttom corner after reading the license agreement and

enter into driver installation interface.

5. Click on the "Manual installation" at the bottom of driver installation interface, and enter into

manual intallation interface.

6. Please select installation language and printer model.

7. Select "Wireless network connection" and click on "Install".

G&G GG IMAGE P4100 Series User Manual

Questions and Answers: