Garbin TEZA A TRACTION - General Information; Warranty

EXCAVATOR “A-TRACTION”
Use and maintenance instruction
Rev. 01/14 - ENG (original)
Via Leonardo da Vinci, 32/B
36034 Malo (VI) Italia
4
T E Z A
IT IS STRICTLY FORBIDDEN TO USE THE MACHINE AND OTHER RELATED
EQUIPMENT BEFORE HAVING READ AND UNDERSTOOD THIS MANUAL.
THE GARBIN GROUP SRL DISCLAIMS ANY AND ALL LIABILITY FOR
DAMAGES DUE TO NEGLIGENCE AND FAILURE TO COMPLY WITH THE
INSTRUCTIONS IN THIS MANUAL.
SECTION 1
Machine description and characteristics
1.1 GENERAL INFORMATION
This manual contains information considered ne-
cessary for the knowledge, good use and routine
maintenance of the «A-TRACTION» model Tren-
cher, which will be referred to hence forth as the
machine, produced by the GARBIN GROUP Srl,
Malo (Vicenza) Italy, hereinafter also known as the
manufacturer.
That written does not constitute a complete de-
scription of the various working parts nor does it
offer a detailed presentation with regard to its ope-
ration, the user will however find everything neces-
sary for its safe use and for the proper maintenan-
ce of the machine.
WARNING
This manual is an integral part of the machine
and should be stored for easy and immediate
reference.
1.2 WARRANTY
The Manufacturer guarantees its products as being
new from the factory for a period of 24 (twenty four)
months from the date of delivery. Please verify,
upon receipt, that the machine is undamaged and
complete. Any complaints must be submitted in
writing within 8 (eight) days of receipt of the machi-
ne. The warranty is will only be valid for the free
repair or replacement of those parts, which after
careful examination by the manufacturer’s techni-
cal office, appear to be defective (with the exclu-
sion of tools and lubricants). The replacement or
repair of parts in warranty will not in any case e-
xtend the terms thereof. The buyer can neverthe-
less assert his rights only if he has complied with
the conditions relating to the provision of the war-
ranty, as referred to in the supply contract.
1.2.1 EXCLUSION FROM WARRANTY
The warranty is void (in addition to that indicated
in the supply contract):
- If the damage occurs as a result of an error cau-
sed by the operator.
- If the damage was due to poor maintenance.
- If, damage is caused as a result of repairs perfor-
mer by the user himself without the prior consent
of the manufacturer or due to the assembly of non-
original parts, or if the machine should be subject
to variation and that damage can be attributed to
these variations.
- If instructions from this manual have not been
followed.
Damage caused by neglect, abuse, misuse and
improper use of the machine are also excluded
from the guarantee.
WARNING
Removal of safety devices, of which the machi-
ne is equipped, will void the warranty automati-
cally together with the responsibilities of the
manufacturer.
Returned goods, even under warranty, must be
sent back carriage paid.
1.3 IDENTIFICATION
Each machine is equipped with an identification
plate (1 Fig. 1), which shows (1 Fig. 1):
- The Manufacturer’s name and address;
- «EC markings»;
- A)Denomination: TRENCH DIGGER;
- B) Chassis number*;
- C) Rated output in kW;
- D) Type/Model*;
- E) Year of manufacture*;
- F) Mass (weight) in Kg.