camera, and it will not capture
time-lapse photos or videos outside of
those periods.
Note: This option is invalid if Mode is
set as "Motion Detection".
Selecting On to enable Wi-Fi, you can
use the app to connect the camera.
Selecting Off to disable Wi-Fi, the
camera will operate in stand-alone mode
and save battery power.
Only change CHX when you feel WiFi
signal is not good or you have multiple
WiFi cameras nearby.
M – Month, D – Day, Y – Year
hh – Hour, mm – Minute
Note: Use "LEFT/RIGHT" key to
switch parameters, use "UP/DOWN" to
set current date and time. Date input
format may change. Please refer to
"Date Format" parameter settings
accordingly.
Select date format which will be shown
on the screen and each capture.
Select time format which will be shown
on the screen and each capture.
12h - AM/PM
Select On to assign a name, 4-character
long, in the form of Capital A-Z, 0-9 to
record the location in the photos (e.g.
A123 for Yellow Stone Park). This helps
multi-camera users identify the location
To Next Page
Loading...
