when reviewing the photos.
Select On to show date, time,
temperature, moon phase on each
capture.
Selecting On option will cause the oldest
files to be overwritten with new captures
when the memory card reaches its
capacity. With Off option selected, the
camera will stop capturing images once
the memory card reaches capacity.
Select On if you only want the camera to
work within a specified time period
every day. For instance, if the starting
time is set at 18:35 and the ending time
at 8:25, the camera will function from
18:35 the current day to 8:25 the next
day. Outside the time period the camera
will not be triggered.
Note: This option is ONLY valid if Mode
is set as "Motion Detection" .
Set up a 4-digit password to protect your
camera from unauthorized users. If the
code is lost, you can contact customer
support to reset the password.
All files will be deleted after formatting
the memory card. For the E6P, E6PCF
and E6PWF models, it’s highly
recommended that you format the
memory card if it has been used
previously in other devices. Caution:
make sure wanted files on the memory
card have been backed up first!
To Next Page
Loading...
