Garland MWG3W Programming Instruction

For use with Garland models: MWE3W, MWE3S, MWG3W, MWE3W-1, MWE3S-1,
MWG3W-1, MWE2W, MWG2S, MWG2W, MWE1W, MWE1S, MWG1W, MWE2W-1,
MWG2S-1, MWG2W-1, MWE1W-1, MWE1S-1, MWG1W-1
The following programming instructions will be used for all 1, 2 and 3 Platen Garland “Product
Recognition” (Intelligap) Clam Grills cooking HOTG 4:1 patties on Iron. These procedures should be
followed in sequence
Overview
1- Enter Programming Mode: Enter McDonald’s AM/PM Menu program mode.
2- Add New Menu Item: These steps show how to change Menu name / Grill Set Point /
Remove In Time / Gap Setting and Multi Stage Settings.
Detail Procedures:
Change Setting for “Opt menu # - Clam
Menu Item
1.1 Press and Hold the button
for approximately three (3)
seconds. Controller will display
previously selected menu item
and its corresponding item
number.
NEW MULTI STAGE HOTG 4:1 PROGRAMMING INSTRUCTION
AS A OPTIONAL MENU ITEM – COOKING ON IRON
2016
101316JED
1 of 4

Garland MWG3W Specifications

General

Category	Grill
Number of Burners	3
Material	Stainless Steel
Power Type	Gas
Fuel Type	Natural Gas or Propane
Burner Output	10, 000 BTU per burner
Cooking Surface Material	Cast Iron
Total BTU	30, 000 BTU