EasyManua.ls Logo

Garland MWE3W - User Manual

Garland MWE3W
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PART #4521777 (08/18/09)
INSTALLATION AND
OPERATION MANUAL
GARLAND GAS & ELECTRIC
CLAMSHELL GRILLS
WITH PRODUCT RECOGNITION
MODELS:
MWE3W
MWE3S
MWG3W
WARNING:
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
PLEASE READ ALL SECTIONS OF THIS MANUAL AND RETAIN FOR FUTURE REFERENCE.
THIS EQUIPMENT MUST BE INSTALLED AND COMMISSIONED BY A PROFESSIONAL,
FACTORY-TRAINED TECHNICIAN.
THIS EQUIPMENT MUST BE OPERATED UNDER AN APPROVED HOOD SYSTEM ONLY.
NOTE: This manual pertains to all grill models listed above. The reader/operator must interpret its contents
to applicable needs. If you have questions about any instructional materials pertaining to Garland grills,
please contact our Customer Service Department at one of the phone numbers below.
MANUFACTURED EXCLUSIVELY FOR McDonald's BY
GARLAND COMMERCIAL INDUSTRIES, LLC
185 EAST SOUTH STREET FREELAND, PENNSYLVANIA 18224
TOLL FREE: (800) 446-8367 PHONE: (570) 636-1000 FAX: (570) 636-9874
E-mail: clamshell@garland-group.com
http://www.garland-group.com

Other manuals for Garland MWE3W

Question and Answer IconNeed help?

Do you have a question about the Garland MWE3W and is the answer not in the manual?

Summary

INTRODUCTION

WARRANTY

SAFETY

SHIPPING DAMAGE CLAIM PROCEDURE

CLEANING & MAINTENANCE

SPECIFICATIONS

INSTALLATION & STARTUP

Hood Type & Platen Height

Guidance on matching platen height to hood type for optimal grill performance.

INSTALLATION OF WRAP AROUND RELEASE MATERIAL MOUNTING BRACKETS

INSTALLATION OF SPLASH SHIELD

INSTALLATION OF RELEASE MATERIAL

GRILL ACCESSORIES

OPERATING INSTRUCTIONS

DESCRIPTION OF GRILL CONTROL

POSSIBLE ERROR MESSAGES

OPERATING PROCEDURES

General Operational Flow

Basic functions, modes, and controls of the grill's operation.

Manual Cooking Modes

Procedures for cooking breakfast and lunch items in manual mode.

Automatic Cooking Modes

Procedures for cooking breakfast and lunch items using product recognition.

Adjusting Cook Times

Instructions on how to modify the cooking duration for selected menu items.

PRODUCT RECOGNITION

TO PERFORM AUTO FORCED CALIBRATION

Steps to recalibrate the platen if product recognition fails or is inaccurate.

PATTY PLACEMENT

PROGRAM LOGIC

CONTROL PROGRAMMING

System Setup Options

How to access and modify system settings like temperature and time units, key chirp, and audible alerts.

Menu Item Management

How to manage menu items, including adding, naming, and restoring defaults.

Temperature Adjustments

Procedure to adjust grill surface set point, must remove in time, and toast buns time.

Alarm and Default Settings

How to configure toast buns alarm and restore factory defaults for functions.

PROBE CALIBRATION

Monthly Calibration of Grill Temperature Zones

Steps for monthly calibration of grill temperature probes for accurate readings.

THERMOCOUPLE LOCATIONS

FACTORY DEFAULT SETTINGS (software version 202)

Clam Menu Items

Table of default settings for clam-based menu items.

Flat Menu Items

Table of default settings for flat-based menu items.

TEMPERATURE CONVERSION

Summary

INTRODUCTION

WARRANTY

SAFETY

SHIPPING DAMAGE CLAIM PROCEDURE

CLEANING & MAINTENANCE

SPECIFICATIONS

INSTALLATION & STARTUP

Hood Type & Platen Height

Guidance on matching platen height to hood type for optimal grill performance.

INSTALLATION OF WRAP AROUND RELEASE MATERIAL MOUNTING BRACKETS

INSTALLATION OF SPLASH SHIELD

INSTALLATION OF RELEASE MATERIAL

GRILL ACCESSORIES

OPERATING INSTRUCTIONS

DESCRIPTION OF GRILL CONTROL

POSSIBLE ERROR MESSAGES

OPERATING PROCEDURES

General Operational Flow

Basic functions, modes, and controls of the grill's operation.

Manual Cooking Modes

Procedures for cooking breakfast and lunch items in manual mode.

Automatic Cooking Modes

Procedures for cooking breakfast and lunch items using product recognition.

Adjusting Cook Times

Instructions on how to modify the cooking duration for selected menu items.

PRODUCT RECOGNITION

TO PERFORM AUTO FORCED CALIBRATION

Steps to recalibrate the platen if product recognition fails or is inaccurate.

PATTY PLACEMENT

PROGRAM LOGIC

CONTROL PROGRAMMING

System Setup Options

How to access and modify system settings like temperature and time units, key chirp, and audible alerts.

Menu Item Management

How to manage menu items, including adding, naming, and restoring defaults.

Temperature Adjustments

Procedure to adjust grill surface set point, must remove in time, and toast buns time.

Alarm and Default Settings

How to configure toast buns alarm and restore factory defaults for functions.

PROBE CALIBRATION

Monthly Calibration of Grill Temperature Zones

Steps for monthly calibration of grill temperature probes for accurate readings.

THERMOCOUPLE LOCATIONS

FACTORY DEFAULT SETTINGS (software version 202)

Clam Menu Items

Table of default settings for clam-based menu items.

Flat Menu Items

Table of default settings for flat-based menu items.

TEMPERATURE CONVERSION

Garland MWE3W Specifications

General IconGeneral
BrandGarland
ModelMWE3W
CategoryGrill
LanguageEnglish

Related product manuals