22 nüvi 610/660 Owner’s Manual
TRAVEL KIT
4. Touch to erase the current rate. Enter a new rate, and touch Done.
5. Touch Save to finish.
TIP: Touch Restore to use the original conversion rate.
TIP: Touch and hold to erase the entire entry.
Converting Measurements
1. On the Menu page, touch Travel Kit > Measurement Converter.
2. Select a type of measurement, and touch OK.
3. Touch a unit of measure that you want to change.
4. Select a unit of measure, and touch OK. Repeat, if necessary.
5. Touch the blank rectangle to enter a value.
6 Enter a value, and touch Done.
7. Touch Clear to enter another measurement.
Using the Calculator
1. On the Menu page, touch Travel Kit > Calculator.
2. Enter the first number of your calculation.
3. Touch an operator (÷, x, -, or +).
4. Enter the second number of your calculation.
5. Touch =.
6. Touch to make a new calculation.
To Next Page
Loading...
