My Vessel Settings
NOTE: Some settings and options require additional charts or hardware.
Select MENU > My Vessel.
Transducers: Shows all transducers on the network, allows you to change transducers, and allows you to view
diagnostic information (Selecting the Transducer Type, page 44).
Temp. Offset: Allows you to set an offset value to compensate for the water temperature reading from a NMEA
®
0183 water-temperature sensor or a temperature-capable transducer (Setting the Water Temperature Offset,
page 60).
Hull ID Number: Allows you to enter the Hull Identification Number (HIN).The HIN might be permanently affixed
to the upper starboard side of the transom or outboard side.
58 Device Configuration
To Next Page
Loading...
Need help?
General