4
Overview
To remove the wrist strap from the Foretrex 201:
1. Place your Foretrex 201 on a cloth or soft surface to avoid scratching the case.
2. While holding the Foretrex 201 steady with one hand, use a jeweler’s band pin
removing tool or a very soft flat head screwdriver. Catch the spring bar’s loaded stem
and pull it back enough for the band to clear the case’s edge.
To replace the wrist strap on the Foretrex 201:
1. To reinstall, insert the spring bar into the wristband and place one side of the spring bar
into one pinhole.
2. Compress the spring bar, and snap it into the other pinhole. Be sure that the spring
bars are secure in the pinholes before using your Foretrex 201.
Getting Started
To Next Page
Loading...
