Radar Functions
Voice Command Function
Start Radar Transmission When a radar is in standby, this starts the radar transmission
Stop Radar Transmission Stops the radar transmission and places the radar in standby
Enable echo trail Enables the echo trail
Disable echo trail Disables the echo trail
Clear echo trail Clears the echo trail
Increase radar gain Increases the radar gain
Decrease radar gain Decreases the radar gain
Increase radar range Increases the radar range
Decrease radar range Decreases the radar range
Automatic Radar Gain High Sets the automatic radar gain to the highest setting
Automatic Radar Gain Low Sets the automatic radar gain to the lowest setting
Automatic Radar Gain Bird Sets the automatic radar gain to the setting best for locating birds
Manual Radar Gain Sets the radar gain to the last manual setting
Radar Rain Clutter On Turns on the rain clutter filter
Radar Rain Clutter Off Turns off the rain clutter filter
Increase Radar Rain Clutter Increases the level of the rain clutter setting
Decrease Radar Rain Clutter Decreases the level of the rain clutter setting
Radar Sea Clutter On Turns on the sea clutter filter
Radar Sea Clutter Off Turns off the sea clutter filter
Increase Radar Sea Clutter Increases the level of the sea clutter setting
Decrease Radar Sea Clutter Decreases the level of the sea clutter setting
Start MotionScope Turns on the MotionScope
™
feature
Stop MotionScope Turns off the MotionScope feature
18 Controlling the Chartplotter
To Next Page
Loading...
