EasyManua.ls Logo

Garmin GPSMAP 276C - Data Field Options

Garmin GPSMAP 276C
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Field Options
The following list provides a brief description of each data field
option. Some of these options are supported only by devices
interfaced to your GPSMAP 276C.
Accuracy: The current accuracy of your GPS determined location.
Battery Timer: The time remaining on the battery before it is fully discharged.
Bearing: The compass direction from your current location to a destination.
Course: The desired path of travel from your starting location to a destination.
Course to Steer: The recommended direction to steer in order to reduce cross-
track error and return to the course line. Displayed as Steer.
Cross Track: The distance you are off a desired course in either direction, left
or right.
Depth: (Marine Only) The depth of water from sonar NMEA input.
Dest Wpt
: See Waypoint (Destination) on the next page.
Distance (Destination): The entire distance, from beginning to end, of a route.
Distance (Next): The distance to the next point on a route.
ETA (Destination): Estimated Time of Arrival. The estimated time you will
reach your destination.
ETA (Next): Estimated Time of Arrival. The estimated time you will reach the
next point on your route.
ETE (Destination): Estimated Time Enroute. The estimated time required to
reach your destination.
ETE (Next): Estimated Time Enroute. The estimated time required to reach the
next point on your route.
Elevation: The altitude (height) above or below mean sea level (MSL).
GPS Status: The current status of the GPS receiver, such as “3D GPS.”
Location (Lat/Lon): Your current location as latitude/longitude coordinates.
Location (Selected): Your current location described in the selected units of
measure (other than lat/lon).
Max Speed: The maximum speed the unit has moved since last reset.
Mov Avg Spd
: See Trip Avg. Speed (Moving) on the next page.
Move Timer
: See Trip Timer (Moving) on the next page.
Next Course: The remaining distance of the route.
Next Turn: The remaining distance to the next waypoint on the route.
Next Wpt
: See Waypoint (Next) on the next page.
Odometer: The total distance traveled since the Odometer was reset.
Pointer: The arrow indicating the direction to travel to the next point on a
route.
Power: The power indicator icon: Battery, External Power, or Charging.
Speed: Your current vehicle speed can be measured in miles per hour,
kilometers per hour, or knots.
Steer: See Course to Steer on the previous page.
Sunrise: The time at which the sun rises on this day.
Sunset: The time at which the sun sets on this day.
116 GPSMAP 276C Owner’s Manual
APPENDIX > DATA FIELD OPTIONS

Table of Contents

Other manuals for Garmin GPSMAP 276C

Related product manuals