To navigate (Go To) a point on the map:
Highlight a point to navigate
to, and press NAV.
Highlight Go To <point
name> and press ENTER.
Follow the magenta line
created on the Map Page.
Stopping and Resuming Navigation
When navigating to a point, you can stop navigation. For example, if you are on a long car trip, but you want to stop for dinner, you can stop
navigation and resume after dinner.
To stop navigation:
While navigating to a point,
press NAV.
Highlight Stop Navigation,
and press ENTER.
Highlight Resume Navigation,
and press ENTER.
58 GPSMAP 278 Owner’s Manual
AUTOMOTIVE MODE > NAVIGATING TO A DESTINATION
To Next Page
Loading...
