GPSMAP 62 Series Owner’s Manual 3
Getting Started
Battery Information
The device operates on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
NiMH or lithium batteries for best
results (page 42).
Installing the Batteries
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
2. Insert the batteries, observing
polarity.
3. Replace the battery cover.
For best results, after you install new
batteries, update the battery type in the
system settings (page 42).
Turning the Device On or
Off
Press and hold .
Setting Your Language
1. Turn on the unit.
2. Use the to select a
language.
Acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
To Next Page
Loading...
