Garmin GPSMAP 86 - Projecting a Waypoint from a Saved Waypoint; Moving a Waypoint on the Map; Finding a Location Near a Waypoint; Setting a Waypoint Proximity Alarm

Projecting a Waypoint from a Saved Waypoint
You can save a new waypoint by projecting the distance and bearing from a saved waypoint to a new location.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Project Waypoint.
4 Enter the bearing, and select Done.
5 Select a unit of measure.
6 Enter the distance, and select Done.
7 Select Save.
Moving a Waypoint on the Map
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Move Waypoint.
4 Select a location on the map.
5 Select Move.
Finding a Location Near a Waypoint
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Find Near Here.
4 Select a category.
The list displays locations near the selected waypoint.
Setting a Waypoint Proximity Alarm
You can add a proximity alarm for a waypoint. Proximity alarms alert you when you are within a specified range
of a particular location.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Set Proximity.
4 Enter the radius.
When you enter an area with a proximity alarm, the device sounds a tone.
Adding a Waypoint to a Route
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Add to Route.
4 Select a route.
Repositioning a Waypoint to Your Current Location
You can change the position of a waypoint. For example, if you move your vehicle, you can change the location
to your current position.
1 Select Waypoint Manager.
2 Select a waypoint.
3 Select MENU > Reposition Here.
The waypoint location changes to your current location.
Navigation 19