Garmin MapSource - Changing or Removing MapSource

6 MapSource User’s Manual
INSTALLING MAPSOURCE > CHANGING OR REMOVING MAPSOURCE
Registering Your Product
If you have not already registered your product using
the UnlockWizard, you can register on Garmin’s Web
site at https://www.garmin.com/registration/selectreg
.jsp.
We highly recommend that you register your
MapSource product to gain important benefits:
• You can be notified of product updates as they
occur.
• You have proof of purchase on file with Garmin
in case your product needs service.
• You have access to reduced-rate mapping data
updates.
Changing or Removing
MapSource
You can repair MapSource if it becomes corrupted.
For some MapSource products, you can modify the
regional coverage area. You can also remove any
MapSource product from your computer.
Repairing MapSource
In some MapSource products, you can repair
MapSource if it becomes corrupt. If this option is not
available, you can uninstall and reinstall the product.
NOTE: You need your MapSource installation
disks to repair MapSource.
To repair MapSource:
1. Insert the MapSource installation disk into your
computer disk drive. The InstallShield Wizard
opens. Click Next.
2. Select Repair and click Next.
3. Follow the additional instructions to repair
MapSource.