13
5.1.2 Sleep mode
The battery is designed to go in sleep mode by itself after 2h of inactivity
to save power. To start the system again after an automatic shut down,
press the button on of the battery (see image below) to exit the sleep
mode. Once the battery button LED is lit, the controller power button
can be pressed to start the system.
Once the battery is out of its sleep mode, follow the steps below to turn
the system on/off:
Press for 2 seconds, the display will turn ON;
Press for 2 seconds, the display will turn OFF. It will automatically
turn OFF when on standby for 5 minutes.
To Next Page
Loading...
