35
If an error code occurs, the display will show the error code and will flicker at the same time. See the detailed definition shown in the table below.
The error code interface can only disappear when the error code is solved. The rider should stop riding immediately if an error code occurs.
7.3 TROUBLESHOOTING
Error code Error definition Solution
03 Brakes enabled Check if a brake cable is stuck
08 Error with motor effect sensor Have your dealer check the system
10 The motor temperature has reached the max protection value
Stop using the electric assistance for a moment so the system
can cool down
12 Error with the current sensor in the controller Have your dealer check the system
13 Error with the temperature sensor in the battery Have your dealer check the system
21 Error with the wheel speedsensor Have your dealer check the system
22 BMS communication error Have your dealer check the system
25 Torque sensor signal error Have your dealer check the system
30 Communication error Have your dealer check the system
To Next Page
Loading...
