Garneau e-ESPACE - E-Urbania Troubleshooting Guide

26
This system can indicate all errors occurring on the Pedelec. To indicate that an error has occurred, the LEDs will flicker as described
in the table below.
Error code Error definition Solution
The second LED flickers 7 times in rapid succession High voltage protection Check the battery voltage using the app
The second LED flickers 8 times in rapid succession Error with the motor effect sensor Have your dealer check the system
The first LED flickers once
The motor temperature has reached the
max protection value
Stop riding and wait until the LED stops flickering
The first LED flickers once then
the second LED flickers twice
Fault with the current sensor in the
controller
Have your dealer check the system
The first LED flickers once then the second LED
flickers 3 times
Error with the temperature sensor in the
battery
Have your dealer check the system
The first LED flickers twice then
the second LED flickers once
Error with the wheel speed sensor Have your dealer check the system
The first LED flickers twice then the second LED
flickers twice
BMS communication error Have your dealer check the system
The first LED flickers 3 times in
rapid succession
Communication fault Have your dealer check the system
6.3 TROUBLESHOOTING