EasyManua.ls Logo

Garrett Pro-Pointer AT 1140900 - Maintenance and Usage Tips; Ruler and Battery Management; Operational Information and Tips

Garrett Pro-Pointer AT 1140900
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Ruler
The Pro-Pointer AT has a ruler molded into its exterior to measure a
target’s depth in either centimeters or inches.
Low Battery Alarm
When the battery becomes low, the detector will sound an alternating
dual-tone alarm. Replace the 9V battery as soon as possible.
Battery Replacement
Simply rotate the battery cover counterclockwise to remove and
clockwise to tighten by hand. To properly install the 9V battery, match
the larger battery terminal to the larger opening in the compartment.
Remove the battery when the unit is to be stored more than 30 days.
Operational Information and Tips
Operation is completely automatic. All metals will be detected
including ferrous and non-ferrous.
When a target is detected, the Pro-Pointer AT will produce
an audio and/or vibration alert. The rate of the pulsing audio and
vibrations increase proportionately as the pinpointer is moved closer
to a metallic target.
Maximum detection of very small targets is obtained against the side
about ½ from the tip.
To avoid cancelling out a target, do not turn on the Pro-Pointer AT while
it is adjacent to the target.

Related product manuals