180
Chapter 13: Maintaining Your Computer
www.gateway.com
Creating an emergency startup
diskette
An emergency startup diskette is a diskette that contains critical information that
you need to start your computer if Windows fails to start. You should create a
startup diskette as soon as you get your computer.
To create an emergency startup diskette:
1 Insert a blank diskette labeled Startup into the diskette drive.
2 Click Start, then click My Computer. The My Computer window opens.
3 Right-click 3½ Floppy (A:), then click Format. The Format 3½ Floppy (A:)
dialog box opens.
4 Click to select the Create an MS-DOS startup disk check box, then click Start.
A message warns you that any information on the diskette will be erased.
5 When you see the warning message, click OK. Windows copies files to the
emergency startup diskette.
To Next Page
Loading...
Need help?
General
