80
Chapter 6: Using Multimedia
www.gateway.com
Inserting a CD or DVD
To insert a CD or DVD:
1 Press the eject button on the CD or DVD drive. After the tray opens slightly,
pull the disc tray completely open.
2 Place the disc in the tray with the label facing up, then press down carefully
on the disc until it snaps into place.
3 Push the tray in until it is closed.
Important Some music CDs have copy protection software. You may
not be able to play these CDs on your computer.
Important When you place a single-sided disc in the tray, make sure
that the label side is facing up. If the disc has two playable
sides, place the disc so that the name of the side you want
to play is facing up.
Activity
indicator
Manual
eject hole
Eject
button
To Next Page
Loading...
Need help?
General
