Replacing the system board 55
4
Grasp the handle, lower the tray assembly slightly, then support the
bottom or back of the tray assembly with your other hand and pull it
away from the chassis.
Caution Do not release the tray assembly until you have lifted it
off the hinges and can safely place it on a work surface.
The hinges are designed to make it easy for you to lift the
tray assembly away from the chassis, but the hinges can
be damaged if the tray assembly is allowed to hang open
or is lowered too far.
05957.book Page 55 Monday, May 8, 2000 10:09 AM
To Next Page
Loading...
