164
Chapter 12: Using the Port Replicator and Docking Station
www.gateway.com
4 Press down on the release latch until it snaps into place.
To separate the notebook from the port replicator:
1 Click Start, then select Undock Computer. The Undock Computer menu
item appears in the Start menu only while the notebook is docked.
2 Lift the release latch on the port replicator until the notebook is
disconnected, then lift the notebook away from the docking posts.
Important The notebook may detect additional devices and add
drivers after being attached to the port replicator. This
process must be completed for components to work
correctly. Follow any on-screen instructions, if necessary.
To Next Page
Loading...
