232
Chapter 16: Restoring Software
www.gateway.com
16 Click Next, then follow the on-screen instructions.
17 If required, go to “Reinstalling Windows NT 4.0 network device drivers”
on page 232. Otherwise, go to “Reinstalling the Windows NT 4.0 Service
Pack” on page 234.
Reinstalling Windows NT 4.0 network device drivers
Use the instructions in this section to reinstall the drivers that support the
network devices in your computer.
To reinstall the Windows NT 4.0 network device driver:
1 Make sure you ran the Windows NT 4.0 Locator utility to find the
network device driver. For more information, see “Locating
Windows NT 4.0 drivers” on page 223.
2 Place Disc 1 of the System Restoration Kit into your CD/DVD drive.
3 If the CD starts automatically, close the CD window.
4 If the driver location information for your network device driver ends
with a file name (for example, setup.exe), go to Step 5.
- OR -
If the driver location information for your network device driver ends
with a backslash (\), go to Step 10.
5 Click Start, then select Run. The Run dialog box opens.
6 In the Open text box, type the drive letter (usually D:\ where D is the
drive letter of your CD/DVD drive), then type the driver location
(directory path) you found using the procedure in “Locating
Windows NT 4.0 drivers” on page 223.
7 Click OK.
8 Follow the on-screen instructions. You have completed the driver
reinstallation.
9 Go to “To reinstall the Windows NT 4.0 Service Pack:” on page 234.
To Next Page
Loading...
