GAUI X3 User Manual

MADE IN TAIWAN
我們建議您從 GAUI 官方網站的下載區下載，
並使用最新的手冊。
本產品是無線遙控的直升機，不當的操作，保養或是組裝
有可能導致遙控直升機對於人身或是物品造成危險。包括，
但是不局限於對於人體產生嚴重傷害甚至死亡的可能性。
© 2013
Overall Length (with Canopy): 690 mm
Specifications
機身長度(含艙罩):690 mm
規格
Main Rotation Diameter: 738 ~ 808 mm
主旋翼迴轉直徑:738 ~ 808 mm
Main blade length: 315 ~ 360 mm
主旋翼長度:315 ~ 360 mm
Overall Height: 230 mm 機身高度:230 mm
Overall Width: 190 mm 機身寬度:190 mm
Tail Blade Length: 62 mm 尾旋翼葉片長度:62 mm
Tail Rotation Diameter: 164 mm 尾旋翼迴轉直徑:164 mm
Flight duration: 3~4 minutes (3D flight) 飛行時間:3~4分鐘 (3D飛行)
Power system (recommended):
ESC: Minimum 40A ESC
LiPo battery (max size: 34 x 34 x 110mm):
3S 11.1V 2000~2300mAh (3400~4000kV BL motor)
6S 22.2V 1000~1400mAh (1300~1800kV BL motor)
動力系統(原廠建議):
1.適用40A以上的電子變速器
2.鋰聚電池(110x34x34mm)及馬達規格:
11.1V 3S 2000~2300mAh (適合3400~4000 KV 無刷馬達)
22.2V 6S 1000~1400mAh (適合1300~1800 KV 無刷馬達)
Total weight: 465g ±3% (kit with canopy,
w/o all electronics, blades and batteries.)
全配重量: 465g ±3% (不含電池&電子裝備&主槳)
INSTRUCTION MANUAL
We recommend downloading and using the latest manual
from Official GAUI website’s download area.
This product is for a radio controlled (RC) helicopter.
Improper operation, maintenance or assembly can
potentially cause a RC helicopter to pose a danger
to persons or objects including but not limited to
the possibility of causing serious physical injury and
even death.
V 1.0.4

GAUI X3 Specifications

General

Motor	Brushless
Battery	6S LiPo
Weight	800g (without battery)
Skill Level	Advanced
Type	RC Helicopter

Summary

Product Specifications and Safety

Specifications

Details on overall dimensions, rotor diameter, flight duration, and recommended power system.

Recommended Power System

Guidance on suitable ESC and LiPo battery specifications for optimal performance.

Safety and Legal Information

Safety Precautions

Essential safety guidelines for handling, assembling, and operating the RC helicopter.

Liability Disclaimer

Legal statement regarding product usage, risks, and user responsibilities.

Helicopter Assembly Guide

Main Shaft Mounts Assembly

Detailed steps for assembling the main shaft mounting components of the helicopter.

Frame Assembly

Instructions for constructing the main body and chassis of the helicopter.

Main Gear Assembly

Guidance on installing and configuring the main gear system for power transmission.

Main Rotor Grip Assembly

Steps for assembling the rotor grip components that attach to the main rotor.

Main Rotor Head Assembly

Procedure for assembling the central head unit of the main rotor system.

Canopy Post Assembly

Instructions for attaching the posts that support the helicopter's canopy.

Motor Assembly

Guide for mounting and connecting the electric motor to the helicopter frame.

Tail Case Assembly

Steps for assembling the rear tail rotor housing and drive components.

Tail Boom Assembly

Procedure for attaching the main tail boom and its associated parts.

Support Rods Assembly

Instructions for installing the structural support rods for stability.

Tail Push Rod Assembly

Steps for installing the push rods that control the tail rotor pitch.

Electronics Installation

Guide for mounting and connecting the ESC, receiver, and gyro.

Mini Servo Installation

Procedure for installing the mini servos used for control surfaces.