GBA ST2 - Introduction

GBA Global Bill Acceptors GBA ST2
Operations Manual
Page 3 of 25
Astrosys International Ltd
January 2009
GBA ST2 Op Manual V1.01
Introduction:
This manual describes the operation and basic servicing of the GBA ST2 note validator. It is
intended to assist the user in the set-up, installation and operation of the product.
If you have any questions about this or any other Astrosys International products then please visit
our web sites at
www.globalbillacceptors.com and www.microcoin.com, or contact your local sales
office for assistance (see last page).
The GBA ST2 has been specially designed to retrofit into all applications previously served by the
GBA stacker less product range. It is also designed for the rigours of the amusement and gaming
markets and can be used in all applications. The following features are also offered:
• Sense Technology note discrimination
• Up to 32 note x 4 way acceptance
• Accepts notes from 61 to 85mm wide (and up to 170mm in length)
• Escrow
• Simple configuration using Programming Card or PC software
• Internal Optical and Mechanical Anti String protection as standard
• 12V (+/- 10%) operation
• Easy access to note path for servicing and cleaning
• On board tri-colour diagnostic LED
• Automatic calibration of optical sensors
• Automatic temperature compensation
• Blue illuminated runway note guide fitted as standard
•
Various faceplate and bezel options to suit host machine
• Manufactured to ISO 9001 standards
• RoHS compliant