3.1.1. Configuration Using the Android App
1. Inside the app, click on the button or on the ‘Click here to add
device’ icon.
2. Choose the “Doorbell2” option, then choose the ‘Hotspot
Connection’ option.
3. Click ‘Next’ to start searching automatically for your new device’s
configuration SSID. If the search finds more than one new device, a
popup screen will appear showing the identification of each one.
Choose the desired device, referencing the GID label placed on the back
cover of the device.
4. When connected, a popup window will appear showing your WiFi
network name and asking you to enter a password. Carefully enter the
password for your identified WiFi network and click ‘Next’.
5. A popup message will appear, showing ‘Command was sent
successfully, the device is configured’. Press ‘OK’ to advance.
6. In the device’s details screen, insert the default password ‘1234’.
You may change the device’s name to any desired name (no spaces,
maximum 20 characters), and press ‘Save’.
*NOTE: Do not change the GID identification.
7. The device’s image will now appear on the ‘Home screen’. To access
your device, click on the image (initially the ‘image’ will be substituted
with a large ControlCam2 icon screen).
Once the IP Doorbell has successfully connected to your WiFi and is
added in your app, you will be able to access the IP Doorbell from
anywhere using WiFi or mobile data (3G/4G).
*NOTE: Use the ‘Add Manually’ (Section 3.2) method to add your IP
Doorbell to additional mobile devices. DO NOT choose the ‘Hotspot
Connection’ configuration again.
3. Network Configuration
To Next Page
Loading...