4.2.2 Modify Unlock Password
A password is required to activate the IP Doorbell’s unlock relay
from the app. This step is also required to allow the ‘One-Key
Unlock’ function.
1. In the ‘Advanced Settings screen’ click on ‘Modify Unlock
Password’.
2. Enter the ‘unlock password’ (current) (the default is 1111), then
insert the ‘new password’ and the ‘password confirmation’.
NOTE: If the unlock password is changed, it must be also changed
to match in all mobile devices accessing the same IP Doorbell.
3. Press ‘Save’.
4. Exit the ‘Device Settings’ screen.
4.2.3 Motion Detection
The ControlCam2 app allows you to set a motion detector alarm for
your IP Doorbell. It alerts you to motion in front of your IP Doorbell,
even if a person does not press the call button.
1. In the ‘Advanced Settings screen’ click on ‘Motion Detection’.
2. Click on the ‘On/Off’ button.
3. Press ‘Save’.
4. Exit the ‘Device Settings’ screen.
NOTE: This Motion detection setting is universal for all mobile
devices sharing the subject IP Doorbell, and will turn On or Off in
all connected instances of the ControlCam2 App.
4.2.4 Set Time
To improve your experience with your IP Doorbell, keep its time
synchronized with your smartphone.
1. In the ‘Advanced Settings screen’ click on ‘Set Time’.
2. A popup message will appear. Then click on ‘OK’ to confirm.
3. Exit the ‘Device Settings’ screen.
To Next Page
Loading...
