GBF PL960 Series - Manually; 4 Using the Controlcam2 App; IP Doorbell Device Settings; Changing Device Name, Username, and Password

4. Using the ControlCam2App
4.1. IP Doorbell Device Settings
From the IP Doorbell’s settings screen it is possible to adjust
features and options in your IP Doorbell.
Access the IP Doorbell’s settings from the app ‘Doorbell’ screen by
clicking on the settings gear-cog icon of the desired device.
4.1.1 Changing device’s name, username and password
NOTE: The username and password entered here must match the
username and/or password configured in to the IP Doorbell.
1. In the ‘Device’s setting screen’ enter the new information
(username and/or password, and device name if desired).
2. Press ‘Save’.
3.2.3 Manually
4. Press the ‘Manual Input’ button.
5. Manually insert the device's GID, referencing the GID label placed
on the back cover of the device.
6. In the device’s details screen, insert the default password ‘1234’.
You may change the device’s name to any desired name (no spaces or
special characters, maximum 20 characters), and press ‘Save’.
*NOTE: Do not change the GID identification.
7. The device’s image will now appear on the ‘Doorbell’ screen. To
access your device, click on the image (initially the ‘image’ will be
substituted with a large ControlCam2 icon screen).
Once the IP Doorbell is successfully connected to your network and is
added in your app, you will be able to access the IP Doorbell from
anywhere using WiFi or mobile data (3G/4G).
- 15 -
"Disabling the IP Doorbell SSID Broadcast
*NOTE
: If your IP Doorbell is connected to your network via a
hardwired ethernet cable, it is recommended to manually turn off
the LIDawXXXXXXXX SSID broadcast using the method described
in Appendix B, ".
3. The app will go back to the ‘Home screen’ and the App will be
initialized with the new information.