GE Security 940 User Manual

Model 94x/97x Proximity Reader
Installation Manual
ii
Figures
Figure 1. Recommended Additional Mounting Instructions
for External Tamper Switch Activation..............................11
Figure 2. Model 940 Reader - Gang Box Mounting.........................12
Figure 3. Model 940 Reader - Direct Wall Mounting.......................13
Figure 4. Model 941 Reader - Gang Box Mounting.........................14
Figure 5. Model 941 Reader - Direct Wall Mounting.......................15
Figure 6. Model 970/972 Reader - Gang Box Mounting ...............16
Figure 7. Model 970/972 Reader - Direct Wall Mounting.............17
Figure 8. Model 971/973 Reader - Gang Box Mounting ...............18
Figure 9. Model 971/973 Reader - Direct Wall Mounting.............19
Figure 10. Model 94x/97x Reader, J1 Connector and DIP
Switch Locations (PCB Assembly P/N 100079002
manufactured 12/02 or later)................................................ 22
Figure 11. (PCB Assembly P/N 100079001 manufactured |
prior to 12/02)................................................................................ 23
Figure 12. Wiring Diagram, Model 94x/97x
Supervised F/2F Mode............................................................... 30
Figure 13. Wiring Diagram, Model 94x/97x
Unsupervised F/2F Mode......................................................... 32
Figure 14. Wiring Diagram, Model 94x/97x
Unsupervised Wiegand Mode ..............................................34
Figure 15. Typical Installation (Internal to the microcontroller)
Using Shielded Cable/Drain Wire......................................... 46
Figure 16. Typical Installation (External to the microcontroller)
Using Shielded Cable/Drain Wire......................................... 46

GE Security 940 Specifications

General

Brand	GE Security
Model	940
Category	Security System
Language	English