GE Contactless Smart Card Reader Model 24x 5
Product Overview
Features
• Universal compatibility with all ISO 15963 and ISO 14443A
credentials (badges, disc tags, and key fobs).
• Supervised four-state (open, closed, wire cut, and wire short)
monitoringfordoorcontacts,REX(requesttoexit).
• Electrical protection (reverse polarity diode protection on power
lines).
• Data lines; high-speed transient voltage suppressor diodes
• Compatible with Micro/5 2RP and 8RP Reader Processor boards,
Micro/PX-2000, and Micro/PXN-2000 controllers
• IP 65-rated sealed electronics for deployment in both interior and
exterior environments.
• Integrated reader tamper protection and supervised data
communications.
• Reads the serial BID (badge ID) number of all ISO 15693 and ISO
14443A credentials.
• 12-button tactile membrane keypad (3 x 4 matrix) for PIN (personal
identification number) entry (Model 245 only).
• RS-485 communications for reader firmware maintenance operations.
Access Control System Compatibility
The Model 24x badge reader outputs a 16-digit badge identification (BID)
number. As a result, the Model 24x Smart Card Readers are compatible
with Picture Perfect while microcontrollers on a Secure Perfect system
must be field-configured for Model 24x compatibility.
Picture Perfect Edition Setup
Refer to Access/Badge Formats or to the Picture Perfect online help for
assistance. A 16-digit BID format must be defined within Picture Perfect.
Enter a suitable badge format description. Example:
16-digit BID
and define the format: %16S.
Secure Perfect Edition Setup
The Secure Perfect Edition access control system supports Badge IDs
(BIDs) up to a maximum of 12-digits. Since the Model 24x readers output
a 16-digit BID number, the Secure Perfect host controller/
To Next Page
Loading...
