GE ADTS542F

ADTS TOUCH
K0553 Revision D 14 [EN] English
ADTS Touch
The ADTS Touch is used to control all required functions. The ADTS Touch can be positioned
(docked) on the ADTS or used as a hand held mobile unit via an umbilical cable or using Blue-
tooth® wireless technology. This allows a person to complete the entire test program remotely
while conveniently seated in the aircraft.
The ADTS Touch will have power applied when docked on a powered-on ADTS, or using an umbil-
ical cable connected to a powered-on ADTS, or can be battery powered.
The ADTS Touch is a touch screen device which features a swipe–action (up/down/left/right)
touch screen user interface with colour graphics and menus.
Figure 1-5: ADTS Touch