MULTI-CHANNEL ADVANCED FEATURES
[EN] English 81 K0553 Revision D
Aims for the 3 channels can be entered manually in the normal method but it is recommended
that the test script is used to reduce operator entry error.
Before using the test set the limits must be correctly set for the aircraft under test including the
Ps1 Ps2 differential limit.
The ADTS shall process a predefined list of set points from a test Script table. Angle of attack is
not calculated and displayed as the calculation differs for each probe.
The Ps2 shall be kept within the Ps1-Ps2 differential limit during ramping and set point control.
The control performance of the 2nd static channel is the same as the primary channel.
To Next Page
Loading...
Need help?
General
