GE AF-600 FP Series Design And Installation Guide

7.7 Motor Bearing Currents
63
8 Status Messages
64
8.1 Status Display
64
8.2 Status Message Definitions
64
9 RS-485 Installation and Set-up
67
9.1 Installation and Set-up
67
9.1 Network Configuration
67
9.1.1 Frequency Converter with Modbus RTU 67
9.1.2 How to Access Parameters 67
9.1.2.1 Parameter Handling 67
9.1.2.2 Storage of Data 67
9.1.2.3 IND 67
9.1.2.4 Text Blocks 67
9.1.2.5 Conversion Factor 67
9.1.2.6 Parameter Values 68
9.2 Drive Control Profile
68
9.2.3 Bus Speed Reference Value 71
10 Warnings and Alarms
72
10.1 System Monitoring
72
10.2 Warning and Alarm Types
72
10.3 Warning and Alarm Displays
72
10.3.1 Warnings/Alarm Messages 73
10.4 Warning and Alarm Definitions
77
11 Basic Troubleshooting
83
11.1 Start Up and Operation
83
12 Terminal and Applicable Wire
86
12.1 Cables
86
13 Specifications
87
13.1 Power-dependent Specifications
87
13.1.1 Power, Currents and Enclosures 87
13.1.2 Dimensions, Unit Size 1x 89
13.1.3 Dimensions, Unit Size 2x 91
13.1.4 Dimensions, Unit Size 3x 93
13.1.5 Dimensions, Unit Size 4xh 95
13.1.6 Dimensions, Unit Size 5x 97
13.1.7 Dimensions, Unit Size 6x 98
13.2 General Technical Data
100
Contents
AF-600 FP
TM
Design and Installation Guide
DET-768b 3

GE AF-600 FP Series Specifications

General

Brand	GE
Model	AF-600 FP Series
Category	I/O Systems
Language	English