– 20 –
Filter Drier
Filter Drier
The fi lter drier should be installed anytime the
sealed system is repaired.
Caution: Brazing heat can cause the mastic to
become sticky and/or catch fi re. Remove the
mastic BEFORE installing the drier and charging
valve.
Replace the mastic after installation to help
deaden sound and reduce rattles.
Parts
Charging Valve - Part # WJ56X61
Mastic - Part # WR2X9363
Drier - Part # WJ56X10003
Mastic
Charging Valve
To Next Page
Loading...
