GE Carestation 750c - 08 Special features; ecoFLOW overview

35
08 Special features
ecoFLOW overview
The ecoFLOW option provides a split screen view that
shows the approximate minimum O
2
ow to maintain a
preset FiO
2
value. It also shows the approximate agent
used per hour and the cost.
The split screen shows the Paw gauge in the upper area
and the ecoFLOW gauge in the lower portion of the
screen. The ecoFLOW gauge consists of a fresh gas ow
tube, an agent ow indicator, and related parameters.
Below the fresh gas ow tube is the measured total O
2
ow to the patient and the calculated FiO
2
ow value. The
FiO
2
ow value is based on the FiO
2
setting specied by a
Super User. This is the minimum O2 ow needed to deliver
a preset inspired O
2
concentration. O2 Total ow greater
than the Fi25 O
2
ow represents excess ow which can be
reduced, while still maintaining desired FiO
2
preset value.
The FiO2 ow value is specic to each patient and case.
The agent ow indicator shows the amount of liquid agent
ow as related to the fresh gas setting. The calculated
cost of the agent shows above this indicator. This cost is
based on agent ow and the values entered in the Super
User mode.
I/min ml/h
02 Total
Sev
€ 6.00 /h
Fi 35
Fi 35 02 flow
0.50
1
2
200
9
20
15
3
Total Flow
0.55
8
Agent