Term Definition
GSM Connection
A menu entry that groups GSM connection settings.
GSM Engine Info
A menu entry that groups information that is returned from the on-board GSM
module on the CS7001 GSM module.
GSM Module See CS7001 GSM Module
GSM Operator
A menu entry that groups information on the current GSM operator and allows a
specific GSM operator to be manually selected.
See the GSM Module Installation Manual (CS7001) for more information.
GSM Engine Comms
A menu option that indicates that communication with the GSM module is
established.
H
Handshake Digit
A menu option that specifies the handshake digit. This digit is sent from the central
station (in the case of a CS535 voice module, this is usually a house phone or a
mobile phone) to the control panel in order to establish a connection.
Hardware zone expander See CS208/CS216 Input Expanders
Hide PINs
A menu option that displays the user code as dashes when programming codes
using the keypad. If this option is disabled, each digit is shown rather than
displayed as a dash.
High Gain Listen In
A menu option that activates high gain listen-in mode. This is a listen-in mode that
is generally used in environments that produce very low noise.
Home Automation
A menu entry that groups options relating to the home automation system.
The control panel can communicate to home automation protocols such as the
X-10 protocol. The connection between the control panel and the X-10 home
automation module is made through the CS507 output expander or the CS534
listen-in module RJ11 connectors. The on-board RS232 connector on the CS275,
CS575 and CS875 can be used to connect to other home automation systems.
Consult your local Aritech Support to obtain more information.
House Code
A menu option that sets the code used to identify a particular premises. It is
necessary in case any neighbouring premises also has an X-10 home automation
system.
More information on the X-10 home automation system can be found at www.x-
10europe.com.
I
Indicator-A Time
Remaining
A menu option that sets the length of time remaining after indicator “A” is sent to
the central station. The two-way session is terminated after this time if there is no
further activity from the central station. This time can be set between 1 and 255
seconds. This is a CS534 listen-in module option.
Indicator-B Time
Remaining
A menu option that sets the length of time remaining after indicator “B” is sent to
the central station. The two-way session is terminated after this time if there is no
further activity from the central station. This time can be set between 1 and 255
seconds. This is a CS534 listen-in module option.
Input Type
A menu entry that groups options that determine the basic features of the selected
zone type.
Inputs
A menu entry that groups options relating to all zones. (Control Panel)
A menu entry that groups options relating to RF zones only. (RF Receivers)
A menu entry that groups time settings relating to inputs. (System
Settings>Timers)
A menu entry that groups options that enable features relating to inputs. (System
Settings>Feature Select)
Installer
The person who installs and programs the system.
Installer Code
A four or six-digit code used to program the system. It specifies the partitions and
parts of the system the installer can access. It can also be used as a standard
arm/disarm code, in which case it becomes user 255.
A menu entry that groups installer code options.
Installer Menu A menu entry that groups all information related to installer programming.
To Next Page
Loading...
