OK Press OK to:
•
Activate the menu
or
• Accept selection changes
or
• Move forward in the menu structure or
• Complete a sequence when entering numeric data.
Hash
When editing text and phone numbers:
• Press
# F1
to move to the first character or number.
• Press # F3 to move to the last character or number.
• Press # to delete from the current position to the last character
or number.
Navigation keys Press the navigation keys to scroll through menu lists and options.
When in multi-area mode or not in a menu:
• Press to display bypassed zones.
• Press to display problem zones.
When editing text and phone numbers:
• Press to overwrite or insert text.
• Press to delete text.
1.3 Other methods of programming
You can use the CS5500 keypad to program the system without the menu system. This
mode uses devices, locations and segments.
To program in this mode using the CS5500 keypad:
• Use the OK/Menu key instead of the * key.
• Use the F2 key instead of the Exit key.
To access this mode, select Installer Menu>Commands>Device/Location Programming.
For more information on navigating the menu, see page 9.
The recommended programming method is to use the menu structure rather
than devices and locations.
You can also program the system using UDx75 software. For more information, see page
16.
To Next Page
Loading...
Need help?
General