GE DewPro MMY30 - Mounting in Normal Environments; Mounting in Environments with Severe Electrical Noise; Emi;Rfi

November 2005
3-2 Wiring Instructions
Mounting in Normal
Environments
A standard two-wire, stranded cable (shown in Figure 3-2 below) can
be used to interconnect the DewPro with the power source.
Figure 3-2: DewPro Interconnections
Mounting in
Environments with
Severe Electrical Noise
EMI/RFI The DewPro MMY30 meets the EMC requirements of IEC 61326 for
equipment used in industrial locations. The MMY30 passed all tests
to the standards IEC 61000-4- to the performance criterion A. Test
details can be found in Chapter 6, Specifications.
Figure 3-3: DewPro Mounted in Environment with
Severe Electrical Noise
Two