November 2005
6-2 Technical Specifications
Optional Onboard
Display with User
Interface
The optional onboard display with user interface uses a matrix
configurator for:
• range changes
• unit of measure selection
• current loop adjustment
• error diagnostics
• current value selection for fault conditions
• and entering a pressure constant for ppm
v
.
EMI/RFI Performance Criterion A:
1. Conducted Emission Test as per CISPR 11 Class A, 2004
2. Radiated Emission Test as per CISPR 11 Class A, 2004
3. Radiated Susceptibility Test as per IEC 61000-4-3, 2002
4. Electrostatic Discharge Test as per IEC 61000-4-2, 2001
5. Electrical Fast Transient Test as per IEC 61000-4-4, 2004
6. High Energy Surge Immunity Test as per IEC 61000-4-5, 2001
7. Power Frequency Magnetic Field Test as per IEC 61000-4-8, 2001
EMC IEC 61326, Industrial Locations
Optional Certifications/
Approvals
FM IS Cl. I, II, III, Div. 1, Grps. A-G, T5
FM XP-IS Cl. I, Div. 1, Grps. A-D, T5
FM NI Cl. I, Div. 2, Grps. A-D, T4A
DIP Cl. II, III, Div. 1, Grps. E-G, T5
ATEX II 3G EEx nA IIC T4
To Next Page
Loading...
