November 2005
4-8 The Optional Display/User Interface (Option G)
Mode of Operation (cont.) 14. Identification Field.
15. Set to Default Values.
16. Resetting the Device.
Location
in Matrix Description of Function
VH
93
This field indicates the software version (i.e., version
2.02 or higher).
Location
in Matrix Description of Function
VH
94
This field sets all factory defaults.
Note: Anything that has been calibrated will not be
reset.
Location
in Matrix Description of Function
VH
99
The device is reset in this field by entering 50.
Note: Reset the device only after field calibration,
using the MMY 245 validator.
To Next Page
Loading...
