GE DewPro MMY30 - Page 9

November 2005
1-2 General System Information
Product Structure (cont.) Orifice Configuration:
A Inlet: None; Outlet: Orifice, with ¼” FNPT
B Inlet: None; Outlet: Orifice, with (6 mm) ¼” tube fitting
C Inlet: None; Outlet: None, with (6 mm) ¼” tube fitting
D Inlet: Orifice; Outlet: None, with (6 mm) ¼” tube fitting
S Other
Enclosure Conduit:
1 M20 X 1.5 F with cable gland
2 M20 X 1.5 F with 1/2” FNPT adaptor
S Other
Output Configuration/Dewpoint Range:
A Td -90 °C to +10 °C (-130 °F to +50 °F), no display, error 22 mA
B Td -90 °C to +10 °C (-130 °F to +50 °F), no display, error Hold
C Td -90 °C to +10 °C (- 130 °F to +50 °F), no display, error 3.6 mA
D 0-100 ppm
v
1 bar, no display, error 22 mA
E 0-100 ppm
v
1 bar, no display, error Hold
F 0-100 ppm
v
1 bar, no display, error 3.6 mA
G With integral display/user interface
H With integral display/user interface, includes moisture units
Lbs/MMSCF, natural gas
S Other