GE Digital Energy LP 11

OPM_LPE_11X_3K0_10K_1GB_V041 2 GE DE LP 11 UPS: User manual 4.1 (GB)
CONTENTS
1 IMPORTANT SAFETY INSTRUCTIONS...................................................................3
1.1 Save these instructions
1.2 General
1.3 Installation
1.4 Storage
1.5 Batteries
2 INTRODUCTION .......................................................................................................5
2.1 Description
2.2 Warranty
3 FUNCTIONAL EXPLANATION..................................................................................6
3.1 Principles of operation
3.2 Normal conditions
3.3 Utility failure
3.4 Automatic bypass switch
3.5 Manual bypass switch
4 INSTALLATION..........................................................................................................8
4.1 Transport
4.2 Unpacking
4.3 Package contents
4.4 Location
4.5 Installation
4.5.1 LP 3/5/6-11: standard installation procedure
4.5.2 LP 3/5/6-11: installation of Digital Energy™ LP battery extension pack(s)
4.5.3 LP 8/10-11: standard installation procedure
4.5.4 LP 8/10-11: installation of Digital Energy™ LP battery extension pack(s)
4.5.5 LP-11 series: 2 / 3 / 4 parallel operating units – additional info
5 OPERATION.............................................................................................................16
5.1 Description of front and rear panel
5.2 Start-up
5.3 Use
5.3.1 Information menu
5.3.2 Status and alarm menu
5.3.3 Service menu
5.3.4 Set-up menu
5.4 Test screens
5.4.1 Battery test, general
5.4.2 Quick battery test
5.4.3 Deep battery calibration test
5.5 Other features
5.5.1 Shutdown
5.5.2 Start without batteries
5.5.3 Sleep and wake-up
5.5.4 Overload protection in bypass mode
5.5.5 ECO-Mode
5 5.6 Auto restart
5.5.7 Superior battery management
6 INTERFACING FEATURES.....................................................................................29
6.1 RS232/Contact interface
6.2 Emergency shutdown
6.3 Relay card (optional)
6.4 SNMP interface (optional)
7 OPTIONAL FEATURES...........................................................................................30
7.1 Extended runtime versions
7.2 Plug-in cards
7.3 RPA-facility (Redundant Parallel Architecture)
8 MAINTENANCE .......................................................................................................31
8.1 General
8.2 Cooling fan
8.3 Batteries
8.4 Safety
8.5 Storage
8.6 Recycling the UPS at the end of service life
9 TROUBLESHOOTING.............................................................................................32
10 SPECIFICATIONS....................................................................................................33
APPENDIX: INSTALLATION DRAWINGS