GE DINAMAP ProCare 300 Masimo - Front Panel

Revision C DINAMAP
®
ProCare Monitor Service Manual 2-5
2009381-001
Equipment Overview: Basic Components
10. Temperature probe cover storage: Box of probe covers is stored here.
11. History button: Press to activate the History mode to view stored patient
data. The most recent entries are displayed first. Press and hold the button
for 2 seconds to clear all entries stored. Refer to the History section of this
manual for more information.
12. Print button: Press to print currently displayed values or all stored entries
when in history mode.
13. On/Off button: Controls on/off state of monitor; push for power on and push
again for power off.
14. Temperature probe connector: Temperature probe cable attaches here.
Front Panel
15. Silence icon: when Silence button is pressed after alarm sounds (silence
active), silence icon (bell) lights to indicate that audible alarms have been
silenced for 2 minutes.
16. Systolic window: 3-digit red LED indicates measured systolic BP in mmHg.
17. Diastolic window: 3-digit red LED indicates measured diastolic BP in mmHg.
18. Alarm volume indicator: lights to indicate you are making a change to the
alarm volume.
19. Pulse volume: lights to indicate you are making a change to the pulse
volume.