GE Druck DPI611

Safety and Quick start guide 10 [EN] English –K0565 Issue 1
8. RELEASE THE PRESSURE / ATTACH THE DEVICE UNDER TEST:
1
2
Figure 9
9. VACUUM OR PRESSURE OPERATIONS:
1
2
3
4
5
Figure 10
Step
Procedure
1
Release the pressure.
2
Use the applicable
adaptor to attach the
device; See Figure 9.
Step
Procedure (Vacuum)
1
Set to vacuum operation
(-).
2
Turn the volume adjuster
to mid-range.
3
Seal the system.
4
Set the vacuum with the
pump.
5
Adjust the vacuum
(+ decrease; - increase).
Step
Procedure (Pressure)
1
Set to pressure operation
(+).
2
Turn the volume adjuster
to mid-range.
3
Seal the system.
4
Set the pressure with the
pump.
5
Adjust the pressure
(+ increase; - decrease).