GE Druck DPI611

Measurement & Control
[EN] English –K0565 Issue 1 Safety and Quick start guide 1
PARTS LIST
MATERIALS
Table 1: Materials
Item
No
Description
1
ON or OFF button; See “Quick Reference”.
2
Pump mechanism.
3
Pneumatic volume adjuster.
4
Test port: To attach the device under test; See Figure 2.
5
Pneumatic pressure release valve to release pressure
in the system.
6
CH1 connectors for: Voltage (V); Current (mA+, mA-);
Switch operation.
7
Isolated CH2 connectors for: Voltage (V); 24 V loop
power supply (24 Vo).
8
Liquid Crystal Display (LCD): Color display with touch-
screen. To make a selection, lightly tap on the
applicable display area.
9
+5 V DC power input socket. This supply also charges
the optional battery pack.
10
USB type A connector for connections to external
peripherals (USB flash memory or optional external
modules).
11
USB mini-type B connector for communication with a
computer.
Material of wetted parts
Aluminum, Brass, Stainless Steel,
Nitrile and Polyurethane seals,
PTFE, Acetal, Nylon.
Material of enclosure and
controls
Polycarbonate, Polyamide,
Polypropylene, Acrylic, Cotton.