Measurement & Control
[EN] English –K0565 Issue 1 Safety and Quick start guide 7
6. BASIC MODES:
Power ON
From OFF – momentarily press the power button until the GE logo
appears.
Power OFF
Press and Release the Power Button:
Select SWITCH OFF from the POWERDOWN OPTIONS window
displayed.
Figure 6
Note: 1. SWITCH OFF can also be achieved by Pressing and holding
the power button until the screen is blank.
2. Use Power OFF to preserve the battery capacity when the
instrument is not in use for extended periods of time.
Standby Mode
Press and Release Power button:
Select GO TO STANDBY from the POWERDOWN OPTIONS window
displayed.
Note: Use Standby mode between the jobs to provide a quick start-
up.
Power up from Standby Mode
When powered up from the standby mode, instrument always
opens the last screen shown before going to standby mode.
To Next Page
Loading...
