– 64 –
Drain Pump Removal or Replacement
1. Remove power to the dishwasher.
2. Remove the door (consult Door Removal section
of this guide).
3. Remove the sump assembly (see Sump Removal
section of this guide).
4. To remove the harness connector, press in on
the tab, then pull to remove the connector.
5. Loosen or remove the Drain Pump Hanger.
6. Loosen the hose clamp and discard, remove or
replace the drain pump.
Mounting Screw
Gromet
Bracket
Drain
Pump
Clamp
7. Use a new clamp when reinstalling.
When reassembling. position the hose properly
onto the locating feature on the sump.
To Next Page
Loading...
