27
05 Installation
User Manual V1.0-2023-10-30
IP66
Mounting Support Requirements
• The mounting support shall be nonammable and reproof.
• Install the equipment on a surface that is solid enough to bear the inverter weight.
• Do not install the product on the support with poor sound insulation to avoid the noise generated by
the working product, which may annoy the residents nearby.
Installation Angle Requirements
• Install the inverter vertically or at a maximum back tilt of 15 degrees.
• Do not install the inverter upside down, forward tilt, backward tilt, or horizontally.
ALT: 4000m
0%~95%RH
To Next Page
